On Sat, Dec 24, 2005 at 22:13:43 -0500,
Luke Lonergan <LLonergan@greenplum.com> wrote:
> David,
>
> > now hot-swap may not be supported on all interface types, that may be what
> > you have run into, but with SCSI or SATA you should be able to hot-swap
> > with the right controller.
>
> That's actually the problem - Linux hot swap is virtually non-functional for SCSI. You can write into the proper places in /proc, then remove and rescan to get a new drive up, but I've found that the resulting OS state is flaky. This is true of the latest 2.6 kernels and LSI and Adaptec SCSI controllers.
>
> The problems I've seen are with Linux, not the controllers.

The other option is to keep hot spares available so that you can have a failure
or two before you have to pull drives out. This might allow you to get to a
maintenance window to swap out the bad drives.

---------------------------(end of broadcast)---------------------------
TIP 1: if posting/reading through Usenet, please send an appropriate
subscribe-nomail command to majordomo@postgresql.org so that your
message can get through to the mailing list cleanly