I'd expect that as long as the TAPE configs in the onconfig are the
same it should be fine.. However I had a HP gotcha the other day,
HP DD3 tape for the archive and on another machine a HP DD4 restore,
this failed everytime. According to HP they are compatible:-)

Cheers

Paul

Carlie wrote:
>
> So... if they are compatible and I am told they are..
>
> When I do a restore (ontape - r) Can I restore my level 0
> from the 60/120 and then do the cont. logical log restore on the
> same 60/120 device? (the 60/120 will read the 20/40 tape)
> Is it smart enough to switch gears in the same job & recongize the two
> different tapes from the same device?
>
> Hope this makes sense.
>
> Paul Watson <paul@oninit.com> wrote in message news:<3FD594D0.6C0603AD@oninit.com>...
> > You should be OK as long as the tapes a compatible
> >
> > Carlie wrote:
> > >
> > > We are currently using IDS 7.31 and ontape.
> > >
> > > Current box RS6000 F80 w/ internal 20/40 tape drive for full & level 0
> > > backup & external 20/40 tape drive for continuous logs
> > >
> > > We are looking to purchase a p615 which will have a 60/120 internal & 20/40
> > > external tape drive. The p615 only comes w/ a 60/120 internal and we plan to
> > > use the F80 as a disaster recovery box.
> > >
> > > Therefore it has been suggested we upgrade the external tape drive on the
> > > F80 to a 60/120. On the p615, we will use the 60/120 for the full & level 0
> > > and a 20/40 external for the continuous logs. To restore on the D/R box
> > > (F80), we were wondering if ontape-r can handle to restore from two different
> > > devices????
> > >
> > > Thanks, Carlie

--
Paul Watson #
Oninit Ltd # Growing old is mandatory
Tel: +44 1436 672201 # Growing up is optional
Fax: +44 1436 678693 #
Mob: +44 7818 003457 #
www.oninit.com #