On 2006-02-22 09:50:11 +0000, Andrew Tyson
<atyson@please.do.not.spam.optus.net> said:

> Hi,
>
> I recently bought a 2nd hand DDS3 in a unipack 611 case, with the
> intention of installing it in the spare 5.25" bay below the DVD in my
> SB1K. Installation was ok from the perspective of power and 50 pin SCSI
> cabling however on the OBP I am getting persistent SCSI bus errors,
> presumably because the device is not set to its accustomed device '5'
> on the bus. The drive has (what appears to me) quite an unusual pin
> SCSI selection cable that was connected to the external SCSI selector
> in the
> unipack case (3 pins on top, one on the bottom). Having looked at
> sunsolve and the archives of this group I haven't found anything
> relevant. I would appreciate any pointers members of the group might be
> able to impart.
>
> Thanks and regards,
> Andrew

It's it;s owt like mine in my newly aquired SB1k then it's jumpered
across the pins for SCSI ID 0 and SCSI ID 2 from which it identifies
itself as SCSI ID 5!

Mines an HP one as I think most are.

HTH

Ste