"Randomize" <dgsoftnz@gmail.com> writes:
> At the moment I suspect that both of my 13w3 monitors have failed so I
> have no real way to connect an actual display to the machine

Adapters such as the Network Technologies 13W3M-15HDF will let you
connect a monitor with the typical 15HD-male connector on the end. The
monitor will need to be able to sync to whatever resolution your graphics
card puts out. If that's 1152x900x76Hz, your choices are more limited, but
if you're willing to live with 1024x768, almost any monitor should work.
Set the OpenBoot EEPROM parameters.
-WBE