Benjamin

If you go into the EFI shell enter "cmos -S 4" The multipler is by
default set to 0 for 533 Mhz, 2 for 667, 3 for 733, and 4 for 800

"Benjamin Gawert" <bgawert@gmx.de> wrote in message news:<2s7b5hF1gd8ocU2@uni-berlin.de>...
> Due to the fact that most time it's standing around collecting dust I want
> to sell my HP i2000 Workstation/Server. It has the following configuration:
>
> - 2 CPUs Itanium800 w. 4MB Cache/CPU (these are the Server CPUs, the
> Workstation processors only had 2MB Cache)
> - 5120MB Memory Registered ECC
> - 2x 36GB hard disk 10krpm Ultra160 SCSI LVD
> - QLogic 12160 Ultra160 SCSI Controller PCI64
> - HP Radeon 7000 32MB AGP Gfx card w. VGA+DVI
> - intel PRO/1000MT Dual Gbit Ethernet Server Adapter PCI-X
> - HP DVDROM drive ATAPI
> - LS120 Diskette drive ATAPI
> - 100MBit Ethernet and Sound on-Board
> - 2 IDE-Channels UDMA/33 on-Board
> - 4x USB (2x front, 2x rear)
> - Incl. HP-UX 11i v1.5 on DVD
>
> With the system comes a complete set of brand new spare boards (one
> systemboard, one CPU board, two memory carriers) and two brand new power
> supplies.
>
> Price is 1100EUR+shipping. System is located in Germany, but I'd ship
> everywhere.
>
> Benjamin