Re: CD-ROM for an HP-745i workstation Hi Newsgroup, hi Stewart Smith schrieb:
> We're trying to locate a CD-ROM drive for an HP-UX 9000/745i workstation
> so that we can re-install the OS and some instrument control software.
> As I understand it there are a small number of Toshiba drives that work
> as bootable devices on these machines, part numbers XM-3101, 3201 and
> 3301. Is this actually the case? We tried it with a more modern 12X
> Toshiba SCSI drive out of a Sun workstation but that didn't work. If
> anyone has one of these drives out of use then we could really use it,
> and obviously can pay for it. Just some advice on possible alternatives
> would be great as well.
>
> Regards
> Stewart
Just 30 minutes ago I solved my same problem with an HP9000-747i. After
several weeks of search I had found Mr. Lutz Krings from Eupen/Belgium.
Totaly fresh in my arms I have 2 drives featuring the 512-byte-mode. My
old NEC- drive wasn't able to read in this mode.
Mr. Krings gave me a:
- Toshiba Model XM-3501B with caddy, missing jumpers, but this doesent't
matter for single ended bus
- Pioneer DR-466 12x with the recommended jumper for 512 bytes
I think both drives will work, the one that leaves unneccessary´could be
yours, I'll report.
Helmut,
fup2 comp.sys.hp.hpux, comp.sys.hp.hardware not exists on my server
--
mail2 ROT13 uw3012_ng_pbzchfreir_qbg_qr |