I just got a 2nd bktr card and installed it. The 2nd card is
not configured. Both cards work when plugged into the first pci
slot. Whichever card is plugged into the 2nd pci slot does not
work. I used MADEDEV to create bktr1 and that seems to have
worked.

crw-r--r-- 1 root wheel 49, 0 Jan 14 13:49 /dev/bktr0
crw-r--r-- 1 root wheel 49, 1 Jan 30 17:04 /dev/bktr1

Any ideas what's wrong?

Dmesg:

OpenBSD 4.0 (GENERIC) #690: Sat Sep 16 20:26:25 MDT 2006
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 536276992 (523708K)
avail mem = 447451136 (436964K)
using 13143 buffers containing 53833728 bytes (52572K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfd470 (58 entries)
bios0: MSI MS-7260
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3500+, 2211.67 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE 3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA MCP55 Memory" rev 0xa1 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA MCP55 ISA" rev 0xa2
nviic0 at pci0 dev 1 function 1 "NVIDIA MCP55 SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
"unknown" at iic1 addr 0x2f not configured
"NVIDIA MCP55 Memory" rev 0xa2 at pci0 dev 1 function 2 not configured
ohci0 at pci0 dev 2 function 0 "NVIDIA MCP55 USB" rev 0xa1: irq 15, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1 "NVIDIA MCP55 USB" rev 0xa2: irq 10
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
pciide0 at pci0 dev 4 function 0 "NVIDIA MCP55 IDE" rev 0xa1: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, DVD SHD-16P1S, GS05> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 5 function 0 "NVIDIA MCP55 SATA" rev 0xa2: DMA
pciide1: using irq 11 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST380811AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide2 at pci0 dev 5 function 1 "NVIDIA MCP55 SATA" rev 0xa2: DMA
pciide2: using irq 5 for native-PCI interrupt
ppb0 at pci0 dev 6 function 0 "NVIDIA MCP55 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 1
bktr0 at pci1 dev 0 function 0 "Brooktree BT878" rev 0x11: irq 11
bktr0: Hauppauge WinCast/TV, <no> tuner.
"Brooktree BT878 Audio" rev 0x11 at pci1 dev 0 function 1 not configured
"Brooktree BT878" rev 0x11 at pci1 dev 1 function 0 not configured
"Brooktree BT878 Audio" rev 0x11 at pci1 dev 1 function 1 not configured
azalia0 at pci0 dev 6 function 1 "NVIDIA MCP55 HD Audio" rev 0xa2: irq 15
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: 0x04x/0x10ec (rev. 0.2), HDA version 1.0
audio0 at azalia0
nfe0 at pci0 dev 8 function 0 "NVIDIA MCP55 LAN" rev 0xa2: irq 10, address 00:16:17:47:3f:9e
ukphy0 at nfe0 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI 0x0001c1, model 0x0002
ppb1 at pci0 dev 11 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci2 at ppb1 bus 2
ppb2 at pci0 dev 12 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci4 at ppb3 bus 4
ppb4 at pci0 dev 14 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci5 at ppb4 bus 5
ppb5 at pci0 dev 15 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
pci6 at ppb5 bus 6
vga1 at pci6 dev 0 function 0 "ATI Radeon X300" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon X300 Sec" rev 0x00 at pci6 dev 0 function 1 not configured
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
umass0 at uhub1 port 10 configuration 1 interface 0
umass0: Generic Mass Storage Device, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Generic, USB SD Reader, 1.00> SCSI0 0/direct removable
sd0: drive offline
sd1 at scsibus1 targ 1 lun 1: <Generic, USB CF Reader, 1.01> SCSI0 0/direct removable
sd1: drive offline
sd2 at scsibus1 targ 1 lun 2: <Generic, USB SM Reader, 1.02> SCSI0 0/direct removable
sd2: drive offline
sd3 at scsibus1 targ 1 lun 3: <Generic, USB MS Reader, 1.03> SCSI0 0/direct removable
sd3: drive offline
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

dave <daf@a64.comcast.net> wrote:
> I just got a 2nd bktr card and installed it. The 2nd card is
> not configured. Both cards work when plugged into the first pci
> slot. Whichever card is plugged into the 2nd pci slot does not
> work. I used MADEDEV to create bktr1 and that seems to have
> worked.
>
> crw-r--r-- 1 root wheel 49, 0 Jan 14 13:49 /dev/bktr0
> crw-r--r-- 1 root wheel 49, 1 Jan 30 17:04 /dev/bktr1
>
> Any ideas what's wrong?
>
Extracted from Dmesg:

bktr0 at pci1 dev 0 function 0 "Brooktree BT878" rev 0x11: irq 11
bktr0: Hauppauge WinCast/TV, <no> tuner.
bktr0 at pci1 dev 0 function 0 "Brooktree BT878" rev 0x11: irq 11
bktr0: Hauppauge WinCast/TV, <no> tuner.

It appears that the two bktr devices are given the same address during
boot. I don't know if this is because the cards are hardwired to the
pci address or if this is a bug in bktr. I tried doing an upgrade to
see if the devices would be made correctly, but only bktr0 was made
by MAKEDEV.

dave <daf@a64.comcast.net> wrote:
> dave <daf@a64.comcast.net> wrote:
>> I just got a 2nd bktr card and installed it. The 2nd card is
>> not configured. Both cards work when plugged into the first pci
>> slot. Whichever card is plugged into the 2nd pci slot does not
>> work. I used MADEDEV to create bktr1 and that seems to have
>> worked.
>>
>> crw-r--r-- 1 root wheel 49, 0 Jan 14 13:49 /dev/bktr0
>> crw-r--r-- 1 root wheel 49, 1 Jan 30 17:04 /dev/bktr1
>>
>> Any ideas what's wrong?
>>
> Extracted from Dmesg:
>
> bktr0 at pci1 dev 0 function 0 "Brooktree BT878" rev 0x11: irq 11
> bktr0: Hauppauge WinCast/TV, <no> tuner.
> bktr0 at pci1 dev 0 function 0 "Brooktree BT878" rev 0x11: irq 11
> bktr0: Hauppauge WinCast/TV, <no> tuner.
>
> It appears that the two bktr devices are given the same address during
> boot. I don't know if this is because the cards are hardwired to the
> pci address or if this is a bug in bktr. I tried doing an upgrade to
> see if the devices would be made correctly, but only bktr0 was made
> by MAKEDEV.

A quick look at the pci scanning code for bktr reveals that the code
to update the eeprom on the card is not implemented. So it is my guess
that after the pci configuration the two cards are seen as one since
they have not been configured during boot to have different addresses.