Intel Desktop Board D201GLY

Hi,


Today I get new motherboard D201GLY:
http://www.intel.com/products/mother...1GLY/index.htm

When I tried to install OpenBSD i get errors as shown here:
http://openbsd.4ezi.com/pic.html
(2 pictures; second is when i booted openbsd with: boot -c
and then typed: disable pciide)

Motherboard chipset is SiS* SiS662

Is this chipset supported by OpenBSD?
http://www.openbsd.org/i386.html


Is there any other like "disable pciide" command get around this
error?


Regards,
TomazZ

I tried to install OpenBSD 3.7, 3.8 but nothing helped.

Then i try to install 4.1 with "disable pciide" and "disable isa" and
then obsd promted me to "install / upgrade / console" but computer
hanged.

But i successfully manage to install version 4.0 only with "disable
pciide" and with all peripherals turned on

I googed and found how to make "disable pciide" permanent.

Only OpenBSD 4.0 works with Intel Desktop Board D201GLY.

This board is great
- uses only about 40W
- size 17x17cm
- very cheap ~66EUR
- only 1 quiet fan for processor
- USB boot support
- auto wake up when power off
- will also boot without motherboard and mouse attached

must go to play with my obsd now ))

Regards,
TomazZ


On 1 avg., 21:51, TomazZ <tzveg...@gmail.com> wrote:
> Hi,
>
> Today I get new motherboard D201GLY:http://www.intel.com/products/mother...1GLY/index.htm
>
> When I tried to install OpenBSD i get errors as shown here:http://openbsd.4ezi.com/pic.html
> (2 pictures; second is when i booted openbsd with: boot -c
> and then typed: disable pciide)
>
> Motherboard chipset is SiS* SiS662
>
> Is this chipset supported by OpenBSD?http://www.openbsd.org/i386.html
>
> Is there any other like "disable pciide" command get around this
> error?
>
> Regards,
> TomazZ

- will also boot without KEYBOARD and mouse attached sorry
- uses 36W when processor idle and 40W on 100%

I also tested booting obsd4.0 from USB key and it works fine.

I also installed:
- windowsXP (no problem),
- FreeBSD (no problem),
- NetBSD (will not install - installation hangs)


Regards,
TomazZ


On 2 avg., 21:39, TomazZ <tzveg...@gmail.com> wrote:
> I tried to install OpenBSD 3.7, 3.8 but nothing helped.
>
> Then i try to install 4.1 with "disable pciide" and "disable isa" and
> then obsd promted me to "install / upgrade / console" but computer
> hanged.
>
> But i successfully manage to install version 4.0 only with "disable
> pciide" and with all peripherals turned on
>
> I googed and found how to make "disable pciide" permanent.
>
> Only OpenBSD 4.0 works with Intel Desktop Board D201GLY.
>
> This board is great
> - uses only about 40W
> - size 17x17cm
> - very cheap ~66EUR
> - only 1 quiet fan for processor
> - USB boot support
> - auto wake up when power off
> - will also boot without motherboard and mouse attached
>
> must go to play with my obsd now ))
>
> Regards,
> TomazZ
>
> On 1 avg., 21:51, TomazZ <tzveg...@gmail.com> wrote:
>
> > Hi,
>
> > Today I get new motherboard D201GLY:http://www.intel.com/products/mother...1GLY/index.htm
>
> > When I tried to install OpenBSD i get errors as shown here:http://openbsd.4ezi.com/pic.html
> > (2 pictures; second is when i booted openbsd with: boot -c
> > and then typed: disable pciide)
>
> > Motherboard chipset is SiS* SiS662
>
> > Is this chipset supported by OpenBSD?http://www.openbsd.org/i386.html
>
> > Is there any other like "disable pciide" command get around this
> > error?
>
> > Regards,
> > TomazZ