On Sun, Jun 13, 2004 at 08:26:31PM -0600, Theo de Raadt wrote:
> The new OpenBSD/i386 snapshot contains a bsd.mp. After installing it,
> you can select (on your own) to swap kernels and try the other one..


(no serial console sorry
OpenBSD 3.5 (GENERIC.MP) #49

it loops into:
apm0 apm set CPU idle interface on (3)
apm0 apm set CPU busy interface on (3)

if I disable amp0 using UKC same effect.


output of the old kernel:

OpenBSD 3.5 (GENERIC) #34: Mon Mar 29 12:24:55 MST 2004
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel"
686-class) 1.27
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,MM
X,FXSR,SSE
real mem = 267956224 (261676K)
avail mem = 242126848 (236452K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(08) BIOS, date 03/21/02, BIOS32 rev. 0 @
0xfb140
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xda84
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfd9e0/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 10 11 12
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc800 0xd0000/0x8000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "VIA", unknown product 0x3101 rev
0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 MX" rev 0xb2
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0 dev 8 function 0 "Intel 82557" rev 0x08: irq 11, address
00:10:dc:2
3:7d:b9
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
pciide0 at pci0 dev 9 function 0 "Promise PDC20265" rev 0x02: DMA,
channel 0 con
figured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 10 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
emu0 at pci0 dev 10 function 0 "Creative Labs SoundBlaster Live" rev
0x07: irq 1
2
ac97: codec id 0x43525914 (Cirrus Logic CS4297A rev 4)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at emu0
"Creative Labs SoundBlaster Live Digital Input" rev 0x07 at pci0 dev 10
function
1 not configured
rl0 at pci0 dev 12 function 0 "Realtek 8139" rev 0x10: irq 11 address
00:02:44:0
f:4a:19
rlphy0 at rl0 phy 0: RTL internal phy
pcib0 at pci0 dev 17 function 0 "VIA VT8366 ISA" rev 0x00
pciide1 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100,
channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide1 channel 0 drive 0: <WDC WD200BB-75AUA1>
wd0: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide1 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI, DVD-ROM 16X, 625A> SCSI0 5/cdrom
removable
cd0(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x1bpci_intr_map:
no mapp
ing for pin D
: couldn't map interrupt
uhci1 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x1bpci_intr_map:
no mapp
ing for pin D
: couldn't map interrupt
uhci2 at pci0 dev 17 function 4 "VIA VT83C572 USB" rev 0x1bpci_intr_map:
no mapp
ing for pin D
: couldn't map interrupt
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c440 netmask cc40 ttymask ccc2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302


--
Exit! Stage Left!