>>>>> "r" == openbsd <openbsd@st.thrush.com> writes:
r> I have an Adaptec 2400A that works on an i386 platform (ASUS A7V333
r> mobo) with the iop(4) driver. I would like to use it on the amd64
r> platform (ASUS A8V SE mobo).

r> I removed the comments from the iop section in the amd64 GENERIC and
r> built a new kernel (from -current as of about Oct 28 1pm EDT).
r> However, the build failed in the link step. There's obviously more
r> required to add amd64 support for the iop driver. What can I do to
r> help?

I have appended an i386 dmesg from the same hardware to further
identify the iop specifics that I would like to use with amd64.

Is support for iop on the radar for amd64? Perhaps, there are other
problems that must be worked out on this platform before iop support
can be made available...

OpenBSD 3.6-current (GENERIC) #17: Sun Oct 31 03:44:33 EST 2004
rd@a7v3332.thrush.com:/pub/OpenBSD/Current/3.6/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) 64 Processor 3000+ ("AuthenticAMD" 686-class) 1.89 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2
real mem = 1072996352 (1047848K)
avail mem = 972316672 (949528K)
using 4278 buffers containing 53751808 bytes (52492K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 09/15/04, BIOS32 rev. 0 @ 0xf0010
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf5aa0/224 (12 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1106 product 0x3227
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "VIA", unknown product 0x282 rev 0x00
pchb1 at pci0 dev 0 function 1 vendor "VIA", unknown product 0x1282 rev 0x00
pchb2 at pci0 dev 0 function 2 vendor "VIA", unknown product 0x2282 rev 0x00
pchb3 at pci0 dev 0 function 3 vendor "VIA", unknown product 0x3282 rev 0x00
pchb4 at pci0 dev 0 function 4 vendor "VIA", unknown product 0x4282 rev 0x00
pchb5 at pci0 dev 0 function 7 vendor "VIA", unknown product 0x7282 rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Matrox MGA G550 AGP" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
iop0 at pci0 dev 9 function 0 "DPT SmartRAID (I2O)" rev 0x02: I2O adapter <ADAPTEC 2400A>
iop0: interrupting at irq 5
ppb1 at pci0 dev 9 function 1 "DPT PCI-PCI" rev 0x02
pci2 at ppb1 bus 2
skc0 at pci0 dev 10 function 0 "Marvell SKv2" rev 0x13: irq 11
skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
sk0 at skc0 port A: address 00:11:2f:62:bd:5b
eephy0 at sk0 phy 0: Marvell 88E1000* Gigabit PHY
pciide0 at pci0 dev 15 function 0 "VIA VT8237 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide1 channel 0 drive 0: <ST340016A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
atapiscsi0 at pciide1 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PLEXTOR, DVDR PX-708A, 1.07> SCSI0 5/cdrom removable
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide1 channel 1 drive 0: <SAMSUNG SP1203N>
wd1: 16-sector PIO, LBA48, 114498MB, 234493056 sectors
wd2 at pciide1 channel 1 drive 1: <ST380011A>
wd2: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
wd2(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 5
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB 2.0" rev 0x86: irq 10
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 10
ac97: codec id 0x414c4790 (Avance Logic <90>)
audio0 at auvia0
pchb6 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb7 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb8 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb9 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627THF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
iop0: configuring...
ioprbs0 at iop0 tid 517: <ST380021, A, 3.19> direct access, fixed
scsibus1 at ioprbs0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <I2O, Container #00, > SCSI2 0/direct fixed
sd0: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301471 sec total
ioprbs1 at iop0 tid 518: <ST380021, A, 3.19> direct access, fixed
scsibus2 at ioprbs1: 1 targets
sd1 at scsibus2 targ 0 lun 0: <I2O, Container #00, > SCSI2 0/direct fixed
sd1: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301471 sec total
ioprbs2 at iop0 tid 519: <ST380021, A, 3.19> direct access, fixed
scsibus3 at ioprbs2: 1 targets
sd2 at scsibus3 targ 0 lun 0: <I2O, Container #00, > SCSI2 0/direct fixed
sd2: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301471 sec total
ioprbs3 at iop0 tid 520: <ST380021, A, 3.10> direct access, fixed
scsibus4 at ioprbs3: 1 targets
sd3 at scsibus4 targ 0 lun 0: <I2O, Container #00, > SCSI2 0/direct fixed
sd3: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301471 sec total
device (class 0x80) at iop0 tid 8 not configured
device (class 0x80) at iop0 tid 9 not configured
device (class 0x80) at iop0 tid 10 not configured
device (class 0x80) at iop0 tid 11 not configured
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
dkcsum: wd2 matched BIOS disk 82
dkcsum: sd0 had no matching BIOS disk
dkcsum: sd1 had no matching BIOS disk
dkcsum: sd2 had no matching BIOS disk
dkcsum: sd3 had no matching BIOS disk
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302