I installed K3B off Disk 3. I can burn data CDs and ISOs fine, but I'm
having problems with VCDs and Cue/Bin files. I keep getting a DAO error.
I checked the K3B webpage, but I can't find an answer there. I have
CdrDao 1.1.9, CDrTools 2.00.3, K3B 0.11.11 installed (also tried it with
0.11.12 off LinuxPackages.net). I have Cdrdao driver set to
generic-mmc-raw and generic-mmc neither helped. Any help would be
appreciated. I attached the logs on the bottom of the message.

Selex

This is the one when trying to burn a VCD

System
-----------------------
K3b Version:0.11.11
KDE Version: 3.2.3
QT Version: 3.3.2

K3bVcdXml:
-----------------------
<?xml version="1.0"?>
<videocd class="vcd" xmlns="http://www.gnu.org/software/vcdimager/1.0/" version="2.0" >
<info>
<album-id></album-id>
<volume-count>1</volume-count>
<volume-number>1</volume-number>
<restriction>0</restriction>
</info>
<pvd>
<volume-id>VIDEOCD</volume-id>
<system-id>CD-RTOS CD-BRIDGE</system-id>
<application-id>CDI/CDI_VCD.APP;1</application-id>
<preparer-id>K3B - VERSION 0.11.11</preparer-id>
<publisher-id>K3B - VERSION 0.11.11</publisher-id>
</pvd>
<filesystem>
<folder>
<name>SEGMENT</name>
</folder>
</filesystem>
<sequence-items>
<sequence-item id="sequence-000" src="/home/selex/count_duckula_-_307_-_the_great_ductective.mpg" >
<default-entry id="entry-000" />
</sequence-item>
<sequence-item id="sequence-001" src="/home/selex/count_duckula_-_dr._von_goosweings_invisible_ray.mpg" >
<default-entry id="entry-001" />
</sequence-item>
<sequence-item id="sequence-002" src="/home/selex/Count_Duckula_-_Transylvanian_Homesick_Blues.mpg" >
<default-entry id="entry-002" />
</sequence-item>
</sequence-items>
</videocd>

cdrdao
-----------------------
Cdrdao version 1.1.9 - (C) Andreas Mueller <andreas@daneb.de>
SCSI interface library - (C) Joerg Schilling
Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.
Using libscg version 'schily-0.8'
ERROR: Inquiry command failed on 'ATAPI:/dev/hdc'.
ATAPI:/dev/hdc: Rev:
Using driver: Generic SCSI-3/MMC (raw writing) - Version 2.0 (options 0x0010)
Burning entire 79 mins disc.
Starting write ERROR: Cannot retrieve drive capabilities mode page.
at speed 0...
Process can be aborted with QUIT signal (usually CTRL-\).
ERROR: Cannot retrieve write parameters mode page.
ERROR: Cannot retrieve write parameters mode page.
ERROR: Cannot retrieve write parameters mode page.
ERROR: Cannot setup disk-at-once writing for this drive.
ERROR: Writing failed.

cdrdao comand:
-----------------------
/usr/bin/cdrdao write --device ATAPI:/dev/hdc --driver
generic-mmc-raw:0x00000010 --speed 48 -n -v 2 --eject --remote 17
/tmp/kde-selex/k3bmayvpc.tmp.cue

This is when I tried to burn a Cue/Bin file

System
-----------------------
K3b Version:0.11.11
KDE Version: 3.2.3
QT Version: 3.3.2

cdrdao
-----------------------
Cdrdao version 1.1.9 - (C) Andreas Mueller <andreas@daneb.de>
SCSI interface library - (C) Joerg Schilling
Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.
Using libscg version 'schily-0.8'
ERROR: Inquiry command failed on 'ATAPI:/dev/hdc'.
ATAPI:/dev/hdc: Rev:
Using driver: Generic SCSI-3/MMC (raw writing) - Version 2.0 (options 0x0010)
Burning entire 79 mins disc.
Starting write ERROR: Cannot retrieve drive capabilities mode page.
at speed 0...
Process can be aborted with QUIT signal (usually CTRL-\).
ERROR: Cannot retrieve write parameters mode page.
ERROR: Cannot retrieve write parameters mode page.
ERROR: Cannot retrieve write parameters mode page.
ERROR: Cannot setup disk-at-once writing for this drive.
ERROR: Writing failed.

cdrdao comand:
-----------------------
/usr/bin/cdrdao write --device ATAPI:/dev/hdc --driver
generic-mmc-raw:0x00000010 --speed 48 -n -v 2 --eject --remote 18
/tmp/kde-selex/k3b3QeVKb.tmp.cue

On 2004-07-27, Selex <bob@someguy.com> wrote:
> I installed K3B off Disk 3. I can burn data CDs and ISOs fine, but I'm
> having problems with VCDs and Cue/Bin files. I keep getting a DAO error.
> I checked the K3B webpage, but I can't find an answer there. I have
> CdrDao 1.1.9, CDrTools 2.00.3, K3B 0.11.11 installed (also tried it with
> 0.11.12 off LinuxPackages.net). I have Cdrdao driver set to
> generic-mmc-raw and generic-mmc neither helped. Any help would be
> appreciated. I attached the logs on the bottom of the message.
>>
It should work with mkisofs and cdrecord.
Trye "BinChunker" for Bin/Cue.
http://he.fi/bchunk/

/Jens
--
Slackware | CRUX-1.3.1 PPC
window manager improved