Hello...
I have some problems to burn with K3B
My distro is Slackware 10.0
I have a HP cd-writer 9100 series
And when i should write i get some errors.
Permission denied , Can´t write in 0x 1x 2x etc.
Slackware found right manufactor but i still can´t burn anything. Ild try to
burn with root and my own account
but it will not work!!!! Please Help me ....

I´am tired to jump up in WinSuck everytime il´d should
burn some shit...........

Have you run the setup in K3B to change the permissions on your optical
drive? Can you post /etc/fstab as well?

Okey
I have did a setup with K3B and change the Permisson´s
but I should take a look in my fstab
....

"reclusive monkey" <reclusive.monkey@gmail.com> wrote in message
news:1102529913.850284.110070@z14g2000cwz.googlegr oups.com...
> Have you run the setup in K3B to change the permissions on your optical
> drive? Can you post /etc/fstab as well?
>

On 2004-12-08, BoOtStrap <nospam@hotmail.com> wrote:
> Okey
> I have did a setup with K3B and change the Permisson´s
> but I should take a look in my fstab
> ...
>
Read "man cdrecord".
Edit /etc/group.
Compile a 2.6.X kernel.

/Jens
--
SLUG

Hello again
here is a more complete log over my K3B burning problems...

This when i tried to burn a audio cd...

System

-----------------------

K3b Version:0.11.14

KDE Version: 3.3.1

QT Version: 3.3.3

cdrdao

-----------------------

Cdrdao version 1.1.9 - (C) Andreas Mueller <andreas@daneb.de>

SCSI interface library - (C) Joerg Schilling

Paranoia DAE library - (C) Monty

Check http://cdrdao.sourceforge.net/drives.html#dt for current driver
tables.

Using libscg version 'schily-0.8'

ATAPI:/dev/hdc: HP CD-Writer+ 9100b Rev: 1.07

Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0010)

Burning entire 79 mins disc.

Starting write ERROR: Cannot retrieve drive capabilities mode page.

at speed 0...

Process can be aborted with QUIT signal (usually CTRL-\).

ERROR: Cannot retrieve write parameters mode page.

ERROR: Cannot setup write parameters for session-at-once mode.

ERROR: Please try to use the 'generic-mmc-raw' driver.

cdrdao comand:

-----------------------

/usr/bin/cdrdao write --device ATAPI:/dev/hdc --driver
generic-mmc:0x00000010 --speed 8 -n -v 2 --eject --remote 21
/tmp/kde-root/k3b_audio_0_.toc

And this with a Video CD.........

cdrdao

-----------------------

Cdrdao version 1.1.9 - (C) Andreas Mueller <andreas@daneb.de>

SCSI interface library - (C) Joerg Schilling

Paranoia DAE library - (C) Monty

Check http://cdrdao.sourceforge.net/drives.html#dt for current driver
tables.

Using libscg version 'schily-0.8'

ATAPI:/dev/hdc: HP CD-Writer+ 9100b Rev: 1.07

Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0010)

Burning entire 79 mins disc.

ERROR: Length of toc (80:02:46, 360196 blocks) exceeds capacity of CD-R
(79:57:73, 359848 blocks).

ERROR: Please use option '--overburn' to start recording anyway.

cdrdao comand:

-----------------------

/usr/bin/cdrdao write --device ATAPI:/dev/hdc --driver
generic-mmc:0x00000010 --speed 8 -n -v 2 --eject --remote 17
/tmp/kde-root/k3bD8oAwb.tmp.cue

and Operation not permitted..........

Here are a copy of my fstab:

# Partitions

/dev/hdb1 / reiserfs defaults 1 1

/dev/hda1 /mnt/winxp ntfs uid=itriton,gid=local,umask=0227 1 0

/dev/hdb5 /mnt/sharing vfat uid=itriton,gid=ftp,umask=0027 1 0

/dev/hdb6 /mnt/backup vfat uid=itriton,gid=local,umask=0027 1 0

/dev/cdrom /mnt/cdrom iso9660 noauto,owner,ro 0 0

/dev/fd0 /mnt/floppy auto noauto,owner 0 0

/dev/sda1 /mnt/usb auto uid=itriton,gid=root,umask=0027 0 0

/dev/sdb1 /mnt/usb auto uid=itriton,gid=root,umask=0027 0 0

# Virtual filesystems

devpts /dev/pts devpts gid=5,mode=620 0 0

proc /proc proc defaults 0 0

#sysfs /sys sysfs defaults 0 0



//BoOtStrap





"BoOtStrap" <nospam@hotmail.com> wrote in message
news:95Htd.10536$d5.93719@newsb.telia.net...
> Hello...
> I have some problems to burn with K3B
> My distro is Slackware 10.0
> I have a HP cd-writer 9100 series
> And when i should write i get some errors.
> Permission denied , Can´t write in 0x 1x 2x etc.
> Slackware found right manufactor but i still can´t burn anything. Ild try
> to burn with root and my own account
> but it will not work!!!! Please Help me ....
>
> I´am tired to jump up in WinSuck everytime il´d should
> burn some shit...........
>

On 2004-12-08, BoOtStrap <nospam@hotmail.com> wrote:
> Okey
> I have did a setup with K3B and change the Permisson´s
> but I should take a look in my fstab
> ...
>
Forget K3B it's broken.
If you want it, pull the CVS version.

/Jens
--
SLUG

Oki Jenso..
I will look for a CVS or can I get another cd-burning
program thats work fine??
and the program must burn Svcd and Vcd

//BoOtStrap


"jenso" <jenso@users.berlios.de> wrote in message
news:slrncrh7n1.vq8.jenso@dacke.local...
> On 2004-12-08, BoOtStrap <nospam@hotmail.com> wrote:
>> Okey
>> I have did a setup with K3B and change the Permisson´s
>> but I should take a look in my fstab
>> ...
>>
> Forget K3B it's broken.
> If you want it, pull the CVS version.
>
> /Jens
> --
> SLUG

On 2004-12-09, BoOtStrap <nospam@hotmail.com> wrote:
> Oki Jenso..
> I will look for a CVS or can I get another cd-burning
> program thats work fine??
> and the program must burn Svcd and Vcd
>
> //BoOtStrap
>
Well cdrecord and dvd+rw-tools, works very nice with the 2.6.9 kernel.
Never use a GUI front end for burning. So i don't know of one.

/Jens
--
SLUG

Hi again..
I did not found any Cd.burning program that support
vcd or svcd burning and i wonder if any can give me some info about what I
can found K3B CVS or another software!!!

Please help me....


"BoOtStrap" <nospam@hotmail.com> wrote in message
news:95Htd.10536$d5.93719@newsb.telia.net...
> Hello...
> I have some problems to burn with K3B
> My distro is Slackware 10.0
> I have a HP cd-writer 9100 series
> And when i should write i get some errors.
> Permission denied , Can´t write in 0x 1x 2x etc.
> Slackware found right manufactor but i still can´t burn anything. Ild try
> to burn with root and my own account
> but it will not work!!!! Please Help me ....
>
> I´am tired to jump up in WinSuck everytime il´d should
> burn some shit...........
>

Hi,

I don't know what is causing your problems in K3B, but looking at your
/etc/fstab, if you change the section 'noauto,owner,ro' to
'noauto,users,ro' on your /dev/cdrom line this will give all users
access to your optical drive. You should also check the permissions of
/dev/cdrom and the device that points to, and make sure the user you
are trying to burn as has full access to that device. You could look
for other burning programs, but most of them will use cdrdao. This is
GNU/Linux remember! Have you tried using the CD burner in Nautilus? I
use Gnome personally but is there a CD burning app in KDE as well?

One of your errors looks to be that the image created won't fit on the
disk.