Hello, all!

Slackware-current, 2.4.29 kernel. I'm getting frequent X crashes while
running KDE. It seems to happen more often than not when I have a
konsole open. Screen blanks, and I get either a very few (1 to 4) or
many (100s) of vertical lines in various colours drawn on the screen.
Ctrl-Alt-Backspace. Keyboard also locks at this point. The only ways out
seem to be to either cycle power or reset the computer.

I'm not Linux-savvy enough (yet) to diagnose where the problem might be.
Can anyone get me started? If this were Windows I'd suspect buggy
hardware, since the drivers are pretty vanilla (i810 chipset & video).

Nick.

Terrance N. Phillip ha scritto:
> Hello, all!
> [SNIP]
> I'm not Linux-savvy enough (yet) to diagnose where the problem might be.
> Can anyone get me started? If this were Windows I'd suspect buggy
> hardware, since the drivers are pretty vanilla (i810 chipset & video).
>
> Nick.

Would you please post the contents of you /var/log/Xorg.0.log file. We
could help you better this way!!
Regards
Sergio
--
"Two plus two gives five, for extremely large values of two."
...ooOO <sedimico chi@cci@la libero p.u.n.t.o. it> OOoo..
Linux Registered User #366688
on http://counter.li.org

SergioDM wrote:
> Terrance N. Phillip ha scritto:
>
>> Hello, all!
>> [SNIP]
>> I'm not Linux-savvy enough (yet) to diagnose where the problem might
>> be. Can anyone get me started? If this were Windows I'd suspect buggy
>> hardware, since the drivers are pretty vanilla (i810 chipset & video).
>>
>> Nick.
>
>
> Would you please post the contents of you /var/log/Xorg.0.log file. We
> could help you better this way!!
> Regards
> Sergio

Here it is (pretty long...):

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/heracles:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.4.29 i686 [ELF]
Current Operating System: Linux heracles 2.4.29 #8 Thu Jan 20 16:36:28
PST 2005 i686
Build Date: 13 February 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 26 09:21:58 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Liquid Video"
(**) | |-->Device "i810"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/local/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").
(WW) `fonts.dir' not found (or not valid) in
"/usr/X11R6/lib/X11/fonts/Speedo/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Speedo/").
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/cyrillic/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(II) Open APM successful
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7120 card 8086,7120 rev 03 class 06,00,00
hdr 00
(II) PCI: 00:01:0: chip 8086,7121 card 0000,0000 rev 03 class 03,00,00
hdr 00
(II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00
hdr 01
(II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00
hdr 80
(II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80
hdr 00
(II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00
hdr 00
(II) PCI: 00:1f:5: chip 8086,2415 card 8086,2415 rev 02 class 04,01,00
hdr 00
(II) PCI: 01:04:0: chip 1106,3065 card 1186,1400 rev 43 class 02,00,00
hdr 00
(II) PCI: 01:06:0: chip 1813,4000 card 0000,0000 rev 02 class 07,80,00
hdr 00
(II) PCI: 01:07:0: chip 13f6,0111 card 13f6,0111 rev 10 class 04,01,00
hdr 80
(II) PCI: 01:07:1: chip 13f6,0211 card 13f6,0211 rev 10 class 07,80,00
hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is
cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[2] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[3] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xb4000000 - 0xf3ffffff (0x40000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:1:0) Intel Corp. 82810 CGC [Chipset Graphics Controller]
rev 3, Mem @ 0xf4000000/26, 0xf8000000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xd5000000 - 0xd50001ff (0x200) MX[b]
[1] -1 0 0xd5001000 - 0xd50010ff (0x100) MX[b]
[2] -1 0 0xf8000000 - 0xf807ffff (0x80000) MX[b](B)
[3] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[b](B)
[4] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[b]
[5] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[6] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[7] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[8] -1 0 0x0000ec00 - 0x0000ec3f (0x40) IX[b]
[9] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[10] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[11] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd5000000 - 0xd50001ff (0x200) MX[b]
[1] -1 0 0xd5001000 - 0xd50010ff (0x100) MX[b]
[2] -1 0 0xf8000000 - 0xf807ffff (0x80000) MX[b](B)
[3] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[b](B)
[4] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[b]
[5] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[6] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[7] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[8] -1 0 0x0000ec00 - 0x0000ec3f (0x40) IX[b]
[9] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[10] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[11] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0xd5000000 - 0xd50001ff (0x200) MX[b]
[6] -1 0 0xd5001000 - 0xd50010ff (0x100) MX[b]
[7] -1 0 0xf8000000 - 0xf807ffff (0x80000) MX[b](B)
[8] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[b](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[11] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[b]
[12] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[13] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[14] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[15] -1 0 0x0000ec00 - 0x0000ec3f (0x40) IX[b]
[16] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[17] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[18] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "i810"
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G
(II) Primary Device is: PCI 00:01:0
(--) Assigning device section with no busID to primary device
(--) Chipset i810 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0xd5000000 - 0xd50001ff (0x200) MX[b]
[6] -1 0 0xd5001000 - 0xd50010ff (0x100) MX[b]
[7] -1 0 0xf8000000 - 0xf807ffff (0x80000) MX[b](B)
[8] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[b](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[11] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[b]
[12] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[13] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[14] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[15] -1 0 0x0000ec00 - 0x0000ec3f (0x40) IX[b]
[16] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[17] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[18] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[5] -1 0 0xd5000000 - 0xd50001ff (0x200) MX[b]
[6] -1 0 0xd5001000 - 0xd50010ff (0x100) MX[b]
[7] -1 0 0xf8000000 - 0xf807ffff (0x80000) MX[b](B)
[8] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[b](B)
[9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[14] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[b]
[15] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[16] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[18] -1 0 0x0000ec00 - 0x0000ec3f (0x40) IX[b]
[19] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[20] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[21] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) I810(0): Depth 24, (--) framebuffer bpp 24
(==) I810(0): RGB weight 888
(==) I810(0): Default visual is TrueColor
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(**) I810(0): DRI is disabled because it runs only at 16-bit depth.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 2.0
(II) I810(0): VESA VBE Total Mem: 1024 kB
(II) I810(0): VESA VBE OEM: Intel810(TM) Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.17
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: i810 Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
(II) I810(0): Manufacturer: AMT Model: 49 Serial#: 16843009
(II) I810(0): Year: 2004 Week: 33
(II) I810(0): EDID Version: 1.3
(II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) I810(0): Signal levels configurable
(II) I810(0): Sync: Separate
(II) I810(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
(II) I810(0): Gamma: 2.20
(II) I810(0): DPMS capabilities: Off; RGB/Color Display
(II) I810(0): First detailed timing is preferred mode
(II) I810(0): redX: 0.637 redY: 0.344 greenX: 0.310 greenY: 0.582
(II) I810(0): blueX: 0.143 blueY: 0.100 whiteX: 0.313 whiteY: 0.329
(II) I810(0): Supported VESA Video Modes:
(II) I810(0): 720x400@70Hz
(II) I810(0): 640x480@60Hz
(II) I810(0): 640x480@72Hz
(II) I810(0): 640x480@75Hz
(II) I810(0): 800x600@60Hz
(II) I810(0): 800x600@72Hz
(II) I810(0): 800x600@75Hz
(II) I810(0): 1024x768@60Hz
(II) I810(0): 1024x768@70Hz
(II) I810(0): 1024x768@75Hz
(II) I810(0): 1280x1024@75Hz
(II) I810(0): Manufacturer's mask: 0
(II) I810(0): Supported Future Video Modes:
(II) I810(0): #0: hsize: 1024 vsize 768 refresh: 72 vid: 19553
(II) I810(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 135.0 MHz Image Size: 338 x 270 mm
(II) I810(0): h_active: 1280 h_sync: 1296 h_sync_end 1440 h_blank_end
1688 h_border: 0
(II) I810(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking:
1066 v_border: 0
(II) I810(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 82 kHz,
PixClock max 140 MHz
(II) I810(0): Serial No: 26L243301485
(II) I810(0): Monitor name: E17LCD2
(--) I810(0): Chipset: "i810"
(--) I810(0): Linear framebuffer at 0xF4000000
(--) I810(0): IO registers at addr 0xF8000000
(II) I810(0): I810CheckAvailableMemory: 206844k available
(**) I810(0): Will alloc AGP framebuffer: 65536 kByte
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(WW) I810(0): config file hsync range 30-83kHz not within DDC hsync ranges.
(II) I810(0): Liquid Video: Using hsync range of 30.00-83.00 kHz
(II) I810(0): Liquid Video: Using vrefresh range of 55.00-75.00 Hz
(II) I810(0): Clock range: 9.50 to 136.00 MHz
(II) I810(0): Not using default mode "640x350" (vrefresh out of range)
(II) I810(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x400" (vrefresh out of range)
(II) I810(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "720x400" (vrefresh out of range)
(II) I810(0): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (vrefresh out of range)
(II) I810(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (vrefresh out of range)
(II) I810(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (unknown reason)
(II) I810(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (vrefresh out of range)
(II) I810(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x960" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "416x312" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "576x384" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x512" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (width too large for
virtual size)
(--) I810(0): Virtual size is 1280x1024 (pitch 2048)
(**) I810(0): *Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) I810(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024
1025 1028 1066 +hsync +vsync
(**) I810(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) I810(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769
772 800 +hsync +vsync
(**) I810(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) I810(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync
(**) I810(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) I810(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync
(**) I810(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) I810(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961
964 1000 +hsync +vsync
(**) I810(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) I810(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865
868 900 +hsync +vsync
(**) I810(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) I810(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771
777 806 +hsync +vsync
(**) I810(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) I810(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync
(**) I810(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) I810(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync
(**) I810(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) I810(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync
(**) I810(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) I810(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643
666 +hsync +vsync
(**) I810(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) I810(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync
(**) I810(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) I810(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync
(**) I810(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) I810(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484
500 -hsync -vsync
(**) I810(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) I810(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491
520 -hsync -vsync
(**) I810(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) I810(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492
525 -hsync -vsync
(--) I810(0): Display dimensions: (340, 270) mm
(--) I810(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) I810(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf8000000 - 0xf807ffff (0x80000) MS[b]
[1] 0 0 0xf4000000 - 0xf7ffffff (0x4000000) MS[b]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[b](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xd5000000 - 0xd50001ff (0x200) MX[b]
[8] -1 0 0xd5001000 - 0xd50010ff (0x100) MX[b]
[9] -1 0 0xf8000000 - 0xf807ffff (0x80000) MX[b](B)
[10] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[b](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[b]
[17] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[18] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[19] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[20] -1 0 0x0000ec00 - 0x0000ec3f (0x40) IX[b]
[21] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[22] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[23] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(==) I810(0): Write-combining range (0xf4000000,0x4000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(II) I810(0): Setting dot clock to 135.0 MHz [ 0x2b 0x6 0x20 ] [ 45 8 2 ]
(II) I810(0): chose watermark 0x4441d000: (tab.freq 135.0)
(II) I810(0): xf86BindGARTMemory: bind key 0 at 0x00000000 (pgoffset 0)
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1024 pages failed
(Cannot allocate memory)
(II) I810(0): No physical memory available for 4194304 bytes of DCACHE
(II) I810(0): xf86BindGARTMemory: bind key 1 at 0x04000000 (pgoffset 16384)
(WW) I810(0): xf86BindGARTMemory: binding of gart memory with key 1
at offset 0x4000000 failed (Invalid argument)
(II) I810(0): Allocation of 4096 bytes for HW cursor failed
(II) I810(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384)
(WW) I810(0): xf86BindGARTMemory: binding of gart memory with key 2
at offset 0x4000000 failed (Invalid argument)
(II) I810(0): Allocation of 16384 bytes for ARGB HW cursor failed
(II) I810(0): Adding 256 scanlines for pixmap caching
(II) I810(0): Allocated Scratch Memory
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
12 256x256 slots
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(**) I810(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc101"
(**) Keyboard1: XkbModel: "pc101"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing
from list!
SetClientVersion: 0 8
SetClientVersion: 0 8
SetGrabKeysState - disabled
SetGrabKeysState - enabled

Terrance N. Phillip ha scritto:
> (WW) I810(0): config file hsync range 30-83kHz not within DDC hsync ranges.
-------------------------------------------------------------------------------
> (II) I810(0): Liquid Video: Using hsync range of 30.00-83.00 kHz
> (II) I810(0): Liquid Video: Using vrefresh range of 55.00-75.00 Hz
> (II) I810(0): Clock range: 9.50 to 136.00 MHz
> (II) I810(0): Not using default mode "640x350" (vrefresh out of range)

I suppose your problem is this. Did you configure the X server by
yourself or you have accepted the default configuration file instead?
If my supposition is right, the problem stands in the way the
frequencies of your monitor have been set. You'd better read on your
monitor's user's guide, in the section of the technical specifications,
about the supported vertical and horizontal frequencies. The, as root,
you must edit the file /etc/X11/xorg.conf, in the "Monitor" Section, and
change the values you find with the suitable ones.
Regards
Sergio
--
"Two plus two gives five, for extremely large values of two."
...ooOO <sedimico chi@cci@la libero p.u.n.t.o. it> OOoo..
Linux Registered User #366688
on http://counter.li.org

"Terrance N. Phillip" <mediocre_person@hotmail.com> wrote:
> Keyboard also locks at this point. The only ways out
> seem to be to either cycle power or reset the computer.

Depending on how serious this crash is it might also be possible to log in
to your computer over the network with telnet or ssh and then kill X.

regards Henrik
--
The address in the header is only to prevent spam. My real address is:
hc2(at)uthyres.com Examples of addresses which go to spammers:
info@k-software.biz svar@webtelevision.se info@webrider.ru root@localhost

SergioDM wrote:
> Terrance N. Phillip ha scritto:
>
>> (WW) I810(0): config file hsync range 30-83kHz not within DDC hsync
>> ranges.
>
> -------------------------------------------------------------------------------
>
>
>> (II) I810(0): Liquid Video: Using hsync range of 30.00-83.00 kHz
>> (II) I810(0): Liquid Video: Using vrefresh range of 55.00-75.00 Hz
>> (II) I810(0): Clock range: 9.50 to 136.00 MHz
>> (II) I810(0): Not using default mode "640x350" (vrefresh out of range)

Hmmm... I took the values right off the monitor manufacturer's spec
sheet, so I don't think that's it. Plus, the display is rock steady
until the crash happens, which can be anytime from minutes to many hours
after power-up.
I'm using 1280x1024 @ 75 MHz refresh, which is also the manufacturer's
recommended resolution.

N
>
>
> I suppose your problem is this. Did you configure the X server by
> yourself or you have accepted the default configuration file instead?
> If my supposition is right, the problem stands in the way the
> frequencies of your monitor have been set. You'd better read on your
> monitor's user's guide, in the section of the technical specifications,
> about the supported vertical and horizontal frequencies. The, as root,
> you must edit the file /etc/X11/xorg.conf, in the "Monitor" Section, and
> change the values you find with the suitable ones.
> Regards
> Sergio

Terrance N. Phillip wrote:
> Hello, all!
>
> Slackware-current, 2.4.29 kernel. I'm getting frequent X crashes while
> running KDE. It seems to happen more often than not when I have a
> konsole open. Screen blanks, and I get either a very few (1 to 4) or
> many (100s) of vertical lines in various colours drawn on the screen.
> Ctrl-Alt-Backspace. Keyboard also locks at this point. The only ways out
> seem to be to either cycle power or reset the computer.

hi there,

did you change the value for the agp-aperture in the bios-setup ?
mine works only ok with 64 MB aperture, and your xorg-log reports
a lot of memory alocation errors.

maybe take alook at that.

cashmir

Terrance N. Phillip wrote:

> SergioDM wrote:
>> Terrance N. Phillip ha scritto:
>>
>>
>> Would you please post the contents of you /var/log/Xorg.0.log file. We
>> could help you better this way!!
>> Regards
>> Sergio
>
> Here it is (pretty long...):
>
Xorg.0.log is the log from the latest (or the current) X session. So, I'm
guessing that's the session you were in when you posted the log. That
session has not crashed (yet), right? You need to look at the log from a
crashed session. X keeps several old logs, or look at Xorg.0.log
immediately after a crash, and before starting X again.

--
Old Man

>
> did you change the value for the agp-aperture in the bios-setup ?
> mine works only ok with 64 MB aperture, and your xorg-log reports
> a lot of memory alocation errors.
>
Had a look and the memory is set to 64 MB, although it's not called agp
aperture on this 1999 bios; the motherboard doesn't even have an agp
port, as I recently was horrified to find out

N

O
>
> Xorg.0.log is the log from the latest (or the current) X session. So, I'm
> guessing that's the session you were in when you posted the log. That
> session has not crashed (yet), right? You need to look at the log from a
> crashed session. X keeps several old logs, or look at Xorg.0.log
> immediately after a crash, and before starting X again.
>
Okay--that makes sense. I'll try to grab Xorg.0.log right after the next
crash, before I restart X. Of course, what this means is that my
computer will not crash for the next month or so...

N