Where can I get a copy of slack 10.2's /etc/rc.d/rc.inet1 ?

Thanks.

#! /bin/sh
# /etc/rc.d/rc.inet1
# This script is used to bring up the various network interfaces.
#
# @(#)/etc/rc.d/rc.inet1 10.2 Sun Jul 24 12:45:56 PDT 2005 (pjv)

############################
# READ NETWORK CONFIG FILE #
############################

# Get the configuration information from /etc/rc.d/rc.inet1.conf:
.. /etc/rc.d/rc.inet1.conf

###########
# LOGGING #
###########

# If possible, log events in /var/log/messages:
if [ -f /var/run/syslogd.pid -a -x /usr/bin/logger ]; then
LOGGER=/usr/bin/logger
else # output to stdout/stderr:
LOGGER=/bin/cat
fi

############################
# DETERMINE INTERFACE LIST #
############################

# Compose a list of interfaces from /etc/rc.d/rc.inet1.conf (with a
maximum
# of 6 interfaces, but you can easily enlarge the interface limit
# - send me a picture of such a box :-).
# If a value for IFNAME[n] is not set, we assume it is an eth'n'
interface.
# This way, the new script is compatible with older rc.inet1.conf
files.
# The IFNAME array will be used to determine which interfaces to bring
up/down.
MAXNICS=6
i=0
while [ $i -lt $MAXNICS ];
do
IFNAME[$i]=${IFNAME[$i]:=eth${i}}
i=$(($i+1))
done
if [ "$DEBUG_ETH_UP" = "yes" ]; then
echo "/etc/rc.d/rc.inet1: List of interfaces: '${IFNAME[@]}'" |
$LOGGER
fi

######################
# LOOPBACK FUNCTIONS #
######################

# Function to bring up the loopback interface. If loopback is
# already up, do nothing.
lo_up() {
if grep lo: /proc/net/dev 1> /dev/null ; then
if ! /sbin/ifconfig | grep "^lo" 1> /dev/null ; then
echo "/etc/rc.d/rc.inet1: /sbin/ifconfig lo 127.0.0.1" | $LOGGER
/sbin/ifconfig lo 127.0.0.1
echo "/etc/rc.d/rc.inet1: /sbin/route add -net 127.0.0.0 netmask
255.0.0.0 lo" | $LOGGER
/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
fi
fi
}

# Function to take down the loopback interface:
lo_down() {
if grep lo: /proc/net/dev 1> /dev/null ; then
echo "/etc/rc.d/rc.inet1: /sbin/ifconfig lo down" | $LOGGER
/sbin/ifconfig lo down
fi
}

#######################
# INTERFACE FUNCTIONS #
#######################

# Function to bring up a network interface. If the interface is
# already up or does not yet exist (perhaps because the kernel driver
# is not loaded yet), do nothing.
if_up() {
# Determine position 'i' of this interface in the IFNAME array:
i=0
while [ $i -lt $MAXNICS ]; do
[ "${IFNAME[$i]}" = "${1}" ] && break
i=$(($i+1))
done
# If the interface isn't in the kernel yet (but there's an alias for
it in
# modules.conf), then it should be loaded first:
if ! grep `echo ${1}: | cut -f 1 -d :`: /proc/net/dev 1> /dev/null ;
then # no interface yet
if /sbin/modprobe -c | grep -w "alias ${1}" | grep -vw "alias ${1}
off" > /dev/null ; then
echo "/etc/rc.d/rc.inet1: /sbin/modprobe ${1}" | $LOGGER
/sbin/modprobe ${1}
fi
fi
if grep `echo ${1}: | cut -f 1 -d :`: /proc/net/dev 1> /dev/null ;
then # interface exists
if ! /sbin/ifconfig | grep -w "${1}" 1>/dev/null || \
! /sbin/ifconfig ${1} | grep "inet addr" 1> /dev/null ; then #
interface not up or not configured
if [ ! "${HWADDR[$i]}" = "" ]; then # Set hardware address
_before_ the interface goes up:
echo "/etc/rc.d/rc.inet1: /sbin/ifconfig ${1} hw ether
${HWADDR[$i]}" | $LOGGER
/sbin/ifconfig ${1} hw ether ${HWADDR[$i]}
fi
if [ ! "${MTU[$i]}" = "" ]; then # Set MTU to something else than
1500
echo "/etc/rc.d/rc.inet1: /sbin/ifconfig ${1} mtu ${MTU[$i]}"
| $LOGGER
/sbin/ifconfig ${1} mtu ${MTU[$i]}
fi
if [ -x /etc/rc.d/rc.wireless ]; then
. /etc/rc.d/rc.wireless ${1} start # Initialize any wireless
parameters
fi
if [ "${USE_DHCP[$i]}" = "yes" ]; then # use DHCP to bring
interface up
[ ${DHCP_HOSTNAME[$i]} ] && DHCP_OPTIONS="-h
${DHCP_HOSTNAME[$i]}"
[ "${DHCP_KEEPRESOLV[$i]}" = "yes" ] &&
DHCP_OPTIONS="$DHCP_OPTIONS -R"
[ "${DHCP_KEEPNTP[$i]}" = "yes" ] &&
DHCP_OPTIONS="$DHCP_OPTIONS -N"
[ "${DHCP_KEEPGW[$i]}" = "yes" ] && DHCP_OPTIONS="$DHCP_OPTIONS
-G"
[ ${DHCP_IPADDR[$i]} ] && DHCP_OPTIONS="$DHCP_OPTIONS -s
${DHCP_IPADDR[$i]}"
echo "/etc/rc.d/rc.inet1: /sbin/dhcpcd -d -t 60
${DHCP_OPTIONS} ${1}" | $LOGGER
/sbin/dhcpcd -d -t 60 ${DHCP_OPTIONS} ${1}
else # bring up interface using a static IP address
if [ ! "${IPADDR[$i]}" = "" ]; then # skip unconfigured
interfaces
# Determine broadcast address from the IP address and
netmask:
BROADCAST[$i]=`/bin/ipmask ${NETMASK[$i]} ${IPADDR[$i]}|cut
-f1 -d' '`
# Set up the network card:
echo "/etc/rc.d/rc.inet1: /sbin/ifconfig ${1} ${IPADDR[$i]}
broadcast ${BROADCAST[$i]} netmask ${NETMASK[$i]}" | $LOGGER
/sbin/ifconfig ${1} ${IPADDR[$i]} broadcast ${BROADCAST[$i]}
netmask ${NETMASK[$i]}
else
if [ "$DEBUG_ETH_UP" = "yes" ]; then
echo "/etc/rc.d/rc.inet1: ${1} interface is not configured
in /etc/rc.d/rc.inet1.conf" | $LOGGER
fi
fi
fi
else
if [ "$DEBUG_ETH_UP" = "yes" ]; then
echo "/etc/rc.d/rc.inet1: ${1} is already up, skipping" |
$LOGGER
fi
fi
else
if [ "$DEBUG_ETH_UP" = "yes" ]; then
echo "/etc/rc.d/rc.inet1: ${1} interface does not exist (yet)" |
$LOGGER
fi
fi
}

# Function to take down a network interface:
if_down() {
# Determine position 'i' of this interface in the IFNAME array:
i=0
while [ $i -lt $MAXNICS ]; do
[ "${IFNAME[$i]}" = "${1}" ] && break
i=$(($i+1))
done
if grep `echo ${1}: | cut -f 1 -d :`: /proc/net/dev 1> /dev/null ;
then
if [ "${USE_DHCP[$i]}" = "yes" ]; then
echo "/etc/rc.d/rc.inet1: /sbin/dhcpcd -k -d ${1}" | $LOGGER
/sbin/dhcpcd -k -d ${1} || /sbin/ifconfig ${1} down
sleep 1
else
echo "/etc/rc.d/rc.inet1: /sbin/ifconfig ${1} down" | $LOGGER
/sbin/ifconfig ${1} down
fi
if [ -x /etc/rc.d/rc.wireless ]; then
. /etc/rc.d/rc.wireless ${1} stop # Kill wireless daemons if any.
fi
fi
}

#####################
# GATEWAY FUNCTIONS #
#####################

# Function to bring up the gateway if there is not yet a default route:
gateway_up() {
if ! /sbin/route -n | grep "^0.0.0.0" 1> /dev/null ; then
if [ ! "$GATEWAY" = "" ]; then
echo "/etc/rc.d/rc.inet1: /sbin/route add default gw ${GATEWAY}
metric 1" | $LOGGER
/sbin/route add default gw ${GATEWAY} metric 1 2>&1 | $LOGGER
fi
fi
}

# Function to take down an existing default gateway:
gateway_down() {
if /sbin/route -n | grep "^0.0.0.0" 1> /dev/null ; then
echo "/etc/rc.d/rc.inet1: /sbin/route del default" | $LOGGER
/sbin/route del default
fi
}

# Function to start the network:
start() {
lo_up
for i in ${IFNAME[@]} ; do
if_up $i
done
gateway_up
}

# Function to stop the network:
stop() {
gateway_down
for i in ${IFNAME[@]} ; do
if_down $i
done
lo_down
}


############
### MAIN ###
############

case "$1" in
'start') # "start" brings up all configured interfaces:
start
;;
'stop') # "stop" takes down all configured interfaces:
stop
;;
'restart') # "restart" restarts the network:
stop
start
;;
*_start) # Example: "eth1_start" will start the specified interface
'eth1'
INTERFACE=`echo $1 | /bin/cut -d '_' -f 1`
if_up $INTERFACE
gateway_up
;;
*_stop) # Example: "eth0_stop" will stop the specified interface 'eth0'
INTERFACE=`echo $1 | /bin/cut -d '_' -f 1`
if_down $INTERFACE
;;
*_restart) # Example: "wlan0_restart" will take 'wlan0' down and up
again
INTERFACE=`echo $1 | /bin/cut -d '_' -f 1`
if_down $INTERFACE
sleep 1
if_up $INTERFACE
gateway_up
;;
'up') # "up" does the same thing as "start"
start
;;
'down') # "down" does the same thing as "stop"
stop
;;
*_up) # "*_up" does the same thing as "*_start"
INTERFACE=`echo $1 | /bin/cut -d '_' -f 1`
if_up $INTERFACE
gateway_up
;;
*_down) # "*_down" does the same thing as "*_stop"
INTERFACE=`echo $1 | /bin/cut -d '_' -f 1`
if_down $INTERFACE
;;
*) # The default is to bring up all configured interfaces:
lo_up
for i in ${IFNAME[@]} ; do
if_up $i
done
gateway_up
esac

# End of /etc/rc.d/rc.inet1

On 4 Jan 2006 01:14:04 -0800, Stanley.Stevenson@gmail.com wrote:

>Where can I get a copy of slack 10.2's /etc/rc.d/rc.inet1 ?

less /path/to/slackware/MANIFEST.bz2
/rc.inet1
?Package

lessee now: "Package: ./n/tcpip-0.17-i486-35.tgz"

Now you know where to find your very own again, mine been damaged.

Reinstall the .tgz and you'll get a fresh rc.inet1.new to play with.

Grant.

<Stanley.Stevenson@gmail.com> wrote in message
news:1136366044.516157.95490@g14g2000cwa.googlegro ups.com...
> Where can I get a copy of slack 10.2's /etc/rc.d/rc.inet1 ?

It would be identical to yours. I believe the file you're actually looking
for is rc.inet1.conf