Hi,

i just tried to install my new T1000 machine via Jumpstart. Since the
machine has
no CD/DVD-ROM or USB connector this is the only chance :-)

My jumpstart server (Images are from 11/06) was already configured for
sum4u machines.
This ist my firts T1000 machine. When adding the machine via
add_install_client I told
Jumpstart that it is a sun4v architecture.

So far so goog. Installation started and ends sucessfull. But when I
reboot the machine
it stops here:

Rebooting with command: boot
Boot device: disk File and args:
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
ERROR: /pci@7c0/pci@0/pci@8/scsi@2/disk: Last Trap: Division by Zero

I checked the boot device but I have no clue what happened here.

Any ideas?

Many thanks,
Markus

mark_ne@gmx.de a écrit :
> Hi,
>
> i just tried to install my new T1000 machine via Jumpstart. Since the
> machine has
> no CD/DVD-ROM or USB connector this is the only chance :-)
>
> My jumpstart server (Images are from 11/06) was already configured for
> sum4u machines.
> This ist my firts T1000 machine. When adding the machine via
> add_install_client I told
> Jumpstart that it is a sun4v architecture.
>
> So far so goog. Installation started and ends sucessfull. But when I
> reboot the machine
> it stops here:
>
> Rebooting with command: boot
> Boot device: disk File and args:
> Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
> FCode UFS Reader 1.12 00/07/17 15:48:16.
> ERROR: /pci@7c0/pci@0/pci@8/scsi@2/disk: Last Trap: Division by Zero
>
> I checked the boot device but I have no clue what happened here.
>
> Any ideas?
>

go to prompt ok:
setenv auto-boot? false
reset-all
boot -rsv

On 20 Mrz., 16:40, jdh13 <jd...@free.fr> wrote:
> mark...@gmx.de a écrit :
>
>
>
>
>
> > Hi,
>
> > i just tried to install my new T1000 machine via Jumpstart. Since the
> > machine has
> > no CD/DVD-ROM or USB connector this is the only chance :-)
>
> > My jumpstart server (Images are from 11/06) was already configured for
> > sum4u machines.
> > This ist my firts T1000 machine. When adding the machine via
> > add_install_client I told
> > Jumpstart that it is a sun4v architecture.
>
> > So far so goog. Installation started and ends sucessfull. But when I
> > reboot the machine
> > it stops here:
>
> > Rebooting with command: boot
> > Boot device: disk *File and args:
> > Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
> > FCode UFS Reader 1.12 00/07/17 15:48:16.
> > ERROR: /pci@7c0/pci@0/pci@8/scsi@2/disk: Last Trap: Division by Zero
>
> > I checked the boot device but I have no clue what happened here.
>
> > Any ideas?
>
> go to prompt ok:
> setenv auto-boot? false
> reset-all
> boot -rsv- Zitierten Text ausblenden -
>
> - Zitierten Text anzeigen -

Thanks, but the situation has not changed after these commands...

On Mar 25, 2:07*am, mark...@gmx.de wrote:
> On 20 Mrz., 16:40, jdh13 <jd...@free.fr> wrote:
>
>
>
>
>
> > mark...@gmx.de a écrit :
>
> > > Hi,
>
> > > i just tried to install my new T1000 machine via Jumpstart. Since the
> > > machine has
> > > no CD/DVD-ROM or USB connector this is the only chance :-)
>
> > > My jumpstart server (Images are from 11/06) was already configured for
> > > sum4u machines.
> > > This ist my firts T1000 machine. When adding the machine via
> > > add_install_client I told
> > > Jumpstart that it is a sun4v architecture.
>
> > > So far so good. Installation started and ends sucessfull. But when I
> > > reboot the machine
> > > it stops here:
>
> > > Rebooting with command: boot
> > > Boot device: disk *File and args:
> > > Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
> > > FCode UFS Reader 1.12 00/07/17 15:48:16.
> > > ERROR: /pci@7c0/pci@0/pci@8/scsi@2/disk: Last Trap: Division by Zero
>
> > > I checked the boot device but I have no clue what happened here.
>
> > > Any ideas?
>
> > go to prompt ok:
> > setenv auto-boot? false
> > reset-all
> > boot -rsv- Zitierten Text ausblenden -
>
> > - Zitierten Text anzeigen -
>
> Thanks, but the situation has not changed after these commands... - Hidequoted text -
>
> - Show quoted text -

Late reply, am sure you found this already but if not,
Below is what I've found on sunsolve pertaining to T2000 jumpstart
kernel errors
Document ID: 83464
Title: Jumpstart of UltraSPARC® T1 based system panics
Update Date: Wed Dec 21 00:00:00 MST 2005
Products: Sun Fire T2000 Server, Sun Fire T1000 Server

Resolution: The T1000/T2000 systems based upon the UltraSPARC T1
Processor (Niagara) and are
'sun4v' architecture systems which is different than the previous
UltraSPARC
servers. So when the add_install_client command is run the
administrator must
specify the correct architecture type 'sun4v' and NOT 'sun4u' as was
needed for
previous UltraSPARC systems. So you can jumpstart it using a
flasharchive built on another sun4v server only.

On 9 Apr., 20:36, raamsan...@gmail.com wrote:
> On Mar 25, 2:07 am, mark...@gmx.de wrote:
>
>
>
> > On 20 Mrz., 16:40, jdh13 <jd...@free.fr> wrote:
>
> > > mark...@gmx.de a écrit :
>
> > > > Hi,
>
> > > > i just tried to install my new T1000 machine via Jumpstart. Since the
> > > > machine has
> > > > no CD/DVD-ROM or USB connector this is the only chance :-)
>
> > > > My jumpstart server (Images are from 11/06) was already configured for
> > > > sum4u machines.
> > > > This ist my firts T1000 machine. When adding the machine via
> > > > add_install_client I told
> > > > Jumpstart that it is a sun4v architecture.
>
> > > > So far so good. Installation started and ends sucessfull. But when I
> > > > reboot the machine
> > > > it stops here:
>
> > > > Rebooting with command: boot
> > > > Boot device: disk File and args:
> > > > Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
> > > > FCode UFS Reader 1.12 00/07/17 15:48:16.
> > > > ERROR: /pci@7c0/pci@0/pci@8/scsi@2/disk: Last Trap: Division by Zero
>
> > > > I checked the boot device but I have no clue what happened here.
>
> > > > Any ideas?
>
> > > go to prompt ok:
> > > setenv auto-boot? false
> > > reset-all
> > > boot -rsv- Zitierten Text ausblenden -
>
> > > - Zitierten Text anzeigen -
>
> > Thanks, but the situation has not changed after these commands... - Hide quoted text -
>
> > - Show quoted text -
>
> Late reply, am sure you found this already but if not,
> Below is what I've found on sunsolve pertaining to T2000 jumpstart
> kernel errors
> Document ID: 83464
> Title: Jumpstart of UltraSPARC® T1 based system panics
> Update Date: Wed Dec 21 00:00:00 MST 2005
> Products: Sun Fire T2000 Server, Sun Fire T1000 Server
>
> Resolution: The T1000/T2000 systems based upon the UltraSPARC T1
> Processor (Niagara) and are
> 'sun4v' architecture systems which is different than the previous
> UltraSPARC
> servers. So when the add_install_client command is run the
> administrator must
> specify the correct architecture type 'sun4v' and NOT 'sun4u' as was
> needed for
> previous UltraSPARC systems. So you can jumpstart it using a
> flasharchive built on another sun4v server only.

Exactly, that was the solution. But I also had to use a the latest OS
at the JS Server, 2005 was not working...

Thanks anyway :-)